| Coyote
Specifications |
| FEATURE |
OEM2500 |
OEM2510 |
BL2500 |
BL2510 |
| Microprocessor |
Rabbit 3000™
at 29.4 MHz |
| Ethernet Port |
10Base-T, RJ-45
(standard) |
N/A |
10Base-T,
RJ-45 (standard) |
N/A |
| Flash Memory |
256K (standard) |
| SRAM |
128K (standard) |
| LEDs |
4, user-programmable |
| Digital Inputs |
8 protected
to ?6 V DC, threshold is 1.5 V nom. |
16: 15 protected to ?6 V DC, 1 protected to +5 ?6V; threshold
is 1.5 V nom. |
| Digital Outputs |
8, sink
up to 200 mA each, 36 V DC max. standoff voltage |
| Analog Inputs |
One 10-bit
resolution, 8-bit accuracy, input range 0.1?.1 V, 10 samples/s |
| Analog Outputs |
Two 9-bit
PWM, 0.1?.1 V DC, 17ms settling time |
| Serial Ports |
5 serial
ports:
| • |
1 RS-485 |
| • |
2 RS-232 or one RS-232 (with
CTS/RTS) |
| • |
1 CMOS level asynchronous or
clocked serial port |
| • |
1 CMOS compatible serial port
for programming/debug |
|
6 serial ports:
| • |
1 RS-485 |
| • |
2 RS-232 or one RS-232
(with CTS/RTS) |
| • |
1 CMOS level asynchronous
or clocked serial port |
| • |
1 expansion serial port
multiplexed to two RS-422 clocked SPI ports |
| • |
1 CMOS compatible serial
port for programming/debug |
|
| Serial Rate |
Max. async
= CLK/8, Max. sync = CLK/2 |
| Real-Time Clock |
Yes |
| Timers |
Ten 8-bit
timers (6 cascadable from the first) and one 10-bit timer
with 2 match registers |
| Watchdog/Supervisor |
Yes |
| Power |
8 ?40 V DC 1 W
typical w/ no load |
8 ?40 V DC 0.8
W
typical w/ no load |
8 ?40 V
DC 1 W
typical w/ no load |
8 ?40 V
DC 0.8 W
typical w/ no load |
| Backup Battery |
N/A |
3 V lithium
coin-type, 1000 mA•h, supports RTC & SRAM |
| Operating Temperature |
-40° to +70°C |
| Humidity |
5–95%, noncondensing |
| Connectors |
4 polarized
9-pin Molex?/sup> type terminals with 0.1"
pitch, two 0.156?pitch 2-pin Molex type, one .1?pitch
2x5 IDC, one 2 mm pitch 2x5 IDC programming port |
5 polarized 9-pin Molex type terminals with 0.1"
pitch, Two 4-pin 0.156? pitch Molex type, two 0.156?pitch
2-pin Molex type, two RJ-45, one 0.1?pitch 2x5 IDC, one
2 mm pitch 2x5 IDC programming port |
| Board Size |
3.95" X 3.95"
X 1.16"
(100 X100 X 29 mm) |
3.95" X3.95"
X.80"
(100 X100 X20 mm) |
3.95" ?3.95"
?1.16"
(100 ?100 ?29 mm) |
3.95" ?3.95"
?0.80"
(100 ?100 ?20 mm) |
