| RabbitCore RCM3400 Specifications |
| FEATURE |
RCM3400 |
RCM3410 |
| Microprocessor |
Rabbit 3000 at 29.4
MHz |
| EMI Reduction |
Spectrum spreader for
reduced EMI (radiated emissions) |
| Flash |
512K |
256K |
| SRAM |
512K |
256K |
| Backup Battery |
Connection for user-supplied
battery (to support RTC and SRAM) |
| Analog Inputs |
8 channels single-ended
(11-bit) or
4 channels differential (12-bit)
Programmable gain: 1, 2, 4, 5, 8, 10, 16, and 20 V/V.
Vref, Convert |
| General-Purpose I/O |
47 digital I/O
| ?/td>
| 41 configurable I/O |
| ?/td>
| 3 fixed inputs |
| ?/td>
| 3 fixed outputs |
|
| Additional Inputs |
2 Startup Mode, Reset
In |
| Additional Outputs |
Status, Reset Out |
| Auxiliary I/O Bus |
8 data and 6 address
(shared with I/O), I/O Read-Write |
| Serial Ports |
5 CMOS-compatible:
| ?/td>
| 4 configurable as asynchronous
(with IrDA), 3 as clocked serial (SPI), and 2 as
SDLC/HDLC (with IrDA) |
| ?/td>
| 1 asynchronous serial port dedicated
for programming |
| ?/td>
| Support for MIR/SIR IrDA transceiver |
|
| Serial Rate |
Max. asynchronous baud
rate = CLK/8 |
| Slave Interface |
Slave port permits use
as master or intelligent peripheral with Rabbit-based
or other master controller |
| Real-Time Clock |
Yes |
| Timers |
Ten 8-bit timers (6
cascadable from the first) and one 10-bit timer with 2
match registers |
| Watchdog/Supervisor |
Yes |
| Pulse-Width Modulators |
10-bit free-running
counter and four pulse-width registers |
| Input Capture |
2-channel input capture
can be used to time input signals from various port pins. |
| Quadrature Decoder |
2-channel quadrature
decoder accepts inputs from external incremental encoder
modules. |
| Power |
3.0?.45 V DC @ 29.4MHz
/ 2.8?.45 V DC @ 14.7 MHz
97 mA @ 3.3 V, 29.4 MHz / 57 mA @ 3.0 V, 14.7 MHz |
| Operating Temp. |
?0캜 to +85캜 |
| Humidity |
5?5%, noncondensing |
| Connectors |
Two 2 x 17 (1.27 mm
pitch) |
| Board Size |
1.37" ?1.16 " ?0.31"
(35 ?29 ?7.4 mm) |
