| RabbitCore RCM3200 Specifications |
| FEATURE |
RCM3200 |
| Microprocessor |
Rabbit 3000 at 44.2 MHz |
| EMI Reduction |
Spectrum spreader for reduced
EMI (radiated emissions) |
| Ethernet Port |
10/100Base-T, RJ-45, 3 LEDs |
| Flash |
512K |
| SRAM |
512K program + 256K data |
| Backup Battery |
Connection for user-supplied battery
(to support RTC and SRAM) |
| General-Purpose I/O |
| 52 digital I/O: |
| ?44 configurable I/O |
| ?4 fixed inputs |
| ?4 fixed outputs |
|
| Additional Inputs |
2 Startup Mode, Reset In |
| Additional Outputs |
Status, Reset Out |
| Auxiliary I/O Bus |
8 data and 6 address (shared with
I/O), plus I/O Read-Write |
| Serial Ports |
| 6 CMOS-compatible: |
| ?/td>
| 6 configurable as asynchronous
(with IrDA),
4 as clocked serial (SPI), and 2 as SDLC/HDLC (with
IrDA) |
| ?/td>
| 1 asynchronous clocked serial
port dedicated for programming |
| ?/td>
| Support for MIR/SIR IrDA transceiver |
|
| Serial Rate |
Max. asynchronous baud rate =
CLK/8 |
| Slave Interface |
Slave port permits use as master
or intelligent peripheral
with Rabbit-based or other master controller |
| Real-Time Clock |
Yes |
| Timers |
Ten 8-bit timers (6 cascadable
from the first) and one 10-bit timer with 2 match registers |
| Watchdog/Supervisor |
Yes |
| Pulse-Width Modulators |
10-bit free-running counter and
four pulse-width registers |
| Input Capture |
2-channel input capture can be
used to time input signals from various port pins. |
| Quadrature Decoder |
2-channel quadrature decoder accepts
inputs from external incremental encoder modules. |
| Power |
3.15?.45 V DC, 255 mA @ 3.3 V |
| Operating Temp. |
?0캜 to +70캜 |
| Humidity |
5?5%, noncondensing |
| Connectors |
Two 2 x 17 (2 mm pitch) |
| Board Size |
2.73" ?1.85" ?0.86"
(69 ?47 ? 22 mm) |
