| RCM2100 RabbitCore Specifications
|
| Feature |
RCM2100 |
RCM2110 |
RCM2120 |
RCM2130 |
| Microprocessor |
Rabbit 2000?at 22.1
MHz |
| Ethernet Port |
10Base-T, RJ-45, 2 LEDs |
None |
| Flash |
512K |
256K |
512K |
256K |
| SRAM |
512K |
128K |
512K |
128K |
| Backup Battery |
Connection for user-supplied
battery (to support RTC and SRAM) |
| General Purpose I/O |
34 parallel I/O include
| ?20 configurable I/O |
| ?8 fixed inputs |
| ?6 fixed outputs |
(grouped in five 8-bit ports and shared with serial ports) |
40 parallel I/O include
| ?26 configurable I/O |
| ?8 fixed inputs |
| ?6 fixed outputs |
(grouped in five 8-bit ports and shared with serial ports) |
| Additional Inputs |
2 Startup Mode, Reset
In |
| Additional Outputs |
Status, Clock, Watchdog
Out, Reset Out |
| Memory I/O |
13 buffered address,
8 buffered data, plus I/O Read-Write and Buffer Enable |
| Serial Ports |
Four 5 V CMOS-compatible,
2 configurable as clocked ports |
| Serial Rate |
Max. burst rate = CLK/32
Max. sustained rate = burst/2 |
| Connectors |
Two 2 x 20, 2 mm IDC
headers |
| Slave Interface |
Slave port permits use
as master or as intelligent peripheral with Rabbit-based
or other master controller |
| Real-Time Clock |
Yes |
| Timers |
Five 8-bit timers (four
cascadable from the first) and one 10-bit timer with 2
match registers |
| Watchdog/Supervisor |
Yes |
| Power |
4.75?.25 V DC, 140 mA |
| Operating Temp. |
?0?to +70캜 |
?0?to +85캜 |
| Humidity |
5?5%, non-condensing |
| Board Size |
3.5" x 2.0" x 0.86"
(89 x 51 x 22 mm) |
3.5" x 2.0" x 0.5"
(89 x 51 x 13 mm) |
